Warenkorb 0
Warenkorb 0
T5 Transporter Side Window Vent Cover Rain Shield Guard For Camper Van Motor Home
T5 Transporter Side Window Vent Cover Rain Shield Guard For Camper Van Motor Home
T5 Transporter Side Window Vent Cover Rain Shield Guard For Camper Van Motor Home
T5 Transporter Side Window Vent Cover Rain Shield Guard For Camper Van Motor Home
3D Cabin

T5 Transporter Side Window Vent Cover Rain Shield Guard For Camper Van Motor Home

£139.99 £159.99
inkl. MwSt. zzgl. Versandkosten

Acrylic external window cover / panel / vent / shield for T5 / T5.1 Vans / Camper Vans / Motor home.

Allows side windows to remain open whilst preventing rain from getting in. Prevents the well known leaking issue with this style of window, for a leak free van.

Provides a vent at the bottom to allow adequate airflow but not big enough to attract attention or allowing hands reaching into the van.

Created with the similar tint to most factory fitting windows, designed to blend in with the look of your van.

Made to fit onto the outside of your existing window with strong adhesive (supplied). Recommended to LIGHTLY warm the adhesive up prior to application (hair dryer or heat gun) and apply to a dry clean surface with pressure for best fit.

When applied correctly its safe for driving within speed limits and does not create any additional noise / whistle / buffeting.

Fits windows with external measurement of (Width: 430mm & Height: 420mm ) or smaller. External vent dimensions: 516mm x 450mm. Please measure your van before purchasing. Likely to fit many other vans with similar windows.

External vent dimensions: 516mm x 450mm

Vent Panel & Adhesive only, van not included.

Being a transparent product there may be very slight imperfections on the curves due to manufacturing processes. These are only visible up close and in no way effect the overall look.

Customer Reviews

Based on 1 review
0%
(0)
0%
(0)
100%
(1)
0%
(0)
0%
(0)
P
Paul Beckett
Great product but spoilled by the sides not laying flat against the window

I am pleased to say that for my 2012 T5 LWB campervan the sizing was great as they fitted with a good few mm to spare. I am impressed with the quality of the vents. I cleaned the windows thoroughly beforehand using rubbing alcohol and warmed the glue strips with a hair dryer. The top edge adhered pretty well and remained so. The sides however gradually peeled away towards the edges leaving little of the glue strip in contact. Pressing the sides against the window and warming them improved the adherence but this was only temporary as they slowly pulled away again leaving only about 2mm of the outside edge adhering in places with no section of the strip achieving more than half-width contact. It appears that the side edges of the vent do not lay flat against the windows but are slightly angled causing this to happen. I just hope that this doesn’t progress to allow rainwater to leak through or even worse, for a vent to detach due to wind force whilst driving.